WaterFilterTop.com

Previous occupant of my home installed an EverPure H-54 water filter to filter the water going to the water dispenser and ice maker of the refrigerator. I've seen these filters online for $55 or so. Is this something that I can easily replace by shutting off the water and using some simple wrenches and screwdrivers? Or should I get it professionally installed?

It's actually very simple to replace. This is a copy and paste from the Everpure website.

How do I remove “used” cartridges and install new ones?

Shut off water and relieve line pressure. For heads with built-in shut-off valve, fully lift handle until it stops.

Hold head firmly. Push upward on cartridge and turn it to left 1/4 turn, until rotation stops.

Pull cartridge out of head.

Align new cartridge lug with head label. Hold head firmly. Insert new cartridge into head.

Turn cartridge to right 1/4 turn until rotation stops.

Turn on water supply. For heads with built-in valve, lower handle.
Note: For head with revolving ring, make sure the valve handle locks firmly into the ring notch.

Flush cartridge by running water through filtered faucet for three minutes to flush cartridge and purge it of air.

2006-07-17 12:49:50 by msabramo

Demonstration of the effectiveness of Everpure water filters.

I have an Everpure H104 water filter installed under my sink that the previous owners installed. Has worked great so far. Changed the filter a year or so ago with no problems. Just swapped in a new filter, and the new one leaks. It seems like the impact of the water when I am done filling my glass forces a few drops out of the top somewhere.

I've placed a pan under it for now, but am going to tackle it again this weekend. Anyone have this happen to them and want to share their experience? I have the 800 number from Everpure.com but am curious to hear your experience with your filter, especially fixing a leaky filter.

Thanks!

care full attention must be taken when closing the filter after filter medium replacement , u just need to replace the rubber "O" ring , the previous one is already become unusable of there would be miss fitting of the ring while closing / righting ,
purchase a new rubber O ring or proper size rubber Gasket. u may also use Teflon PTFE for this , but rubber is best, available from every big hardware shop

2007-08-30 14:46:42 by jg

Price: $429.99 $142.98

Finely polishes treated water to premium quality for drinking and cooking; a lower operating cost that is below the price of bottled water
Removes chlorine taste and odor, dirt and cloudiness, mold and algae and particles 1/2-Micron and larger in size
Inhibits limescale build-up in water-using appliances; easy to install using household common tools

I'm looking for an after market water filter to replace a EV9970-40
filter kit, or just the filter itself.

Try Walmart...

2008-12-24 10:48:48 by StampHappy

Price: $114.99 $49.00

Inhibits limescale build-up in water-using appliances
The Everpure H-104 drinking water cartridge reduces the following contaminants: lead , asbestos fibers, cysts such as giardia lambila, and cryptosporidium
Removes chlorine taste and odor, dirt and cloudiness, mold and algae and particles 1/2-Micron and larger in size